Applications

Applications
• Decontaminating systems
• Flushing new or repaired systems
• Dispensing new oil
• Pre-filtering new oil
• Evacuating used oil
• Reservoir top-offs
• Flushing systems
• Collecting oil samples for analysis

Intended Use
• To be used for offline, secondary filtration and not inline filtration
• In general industrial environments, both indoors and outdoors (IP rating of 54)
• For filtering mineral-based industrial oils and most synthetic oils with a maximum operating viscosity range of ISO 680 at 100°F/38°C (3,000 ssu/648cSt) within ambient temperature ranges of -15°F to 150°F (-26°C to 66°C)
• Placed at the same level or below the equipment being filtered and within reach of the recommended standard 12 foot hoses
• This system should be stored and used on a level surface, right side up, in a low-traffic area, and connected to the appropriate power source

Descriptions

What is Standard
• Automatic pressure relief valve
• Non-bypass filter heads which prevent particles from passing by when the filters reach maximum saturation
• Dual-stage filtration
• 12′ hose assemblies with various quick connect options
• Pneumatic wheels for easy mobility
• Industrial powder-coated paint
• Heavy-duty cart with oil catch pan
• One-year warranty
• 25 ft cord (for electric motors only)


Specifications

For filtering mineral-based industrial oils and most synthetic oils with a maximum operating viscosity range of ISO VG 680 (3000ssu/648cSt) at 100°F/38°C within ambient temperature ranges of -15°F to 150°F (-26°C to 66°C)

Materials:
• Frame: Carbon steel
• Paint: Industrial powder coat
• Filter Heads: Aluminum
• Fittings: Zinc-plated steel and/or brass
• Pumps: Aluminum/steel
• Hoses: Clear PVC with steel wire or hydraulic hose
• Gaskets: Buna-N

Filter Indicators:
• Filter indicator pops at 22psid (1.55bar) as warning that filter elements need to be replaced

Pump Relief:
• Opens at 65psi

Weight:
• Approximately 100-150lbs (will vary depending on options selected)

Dimensions:
• 18.8″L x 21.5″W x 46.4″H


Power Supply

What type of power supply do you need?
• 115v, 60 Hz, 1725 rpms, 13 amps
• 230v, 60 Hz, 1725 rpms, 6.5 amps
• 110v, 50 Hz, 1425 rpms, 12.4 amps
• 220v, 50 Hz, 1425 rpms, 6.2 amps
• Air / 1.7 hp, 0-3000 rpms

Viscosity Range: ISO VG 10-680 at 100F

Select the desired flow rate.
• 2 gpm
• 5 gpm
• 10 gpm

Performance will vary depending on operating temperature, fluid type, and unit options. Call Des-Case for assistance in choosing a flow rate specific to your needs.